| |
|
| |
|
| ›› |
Voltage scope: |
10V, 12V, 15V, 18V, 24V |
 |
| ›› |
Range of operation voltage: |
+10% -15% |
| ›› |
Cold Resistance: |
0.3--1.5 Ohms |
| ›› |
Time for reaching to 1000°C: |
3Sec |
| ›› |
Rated Temperature: |
>1080°C |
| ›› |
Power: |
20W |
| |
Note: The data in table are for reference only. The actual value will be adjusted according to the customers’ specific applications. |
| |
|
| |
|
|
|
| ›› |
Materials of heater |
Si3N4 & MoSi2 |
|
| ›› |
Materials of holder |
Holder The Igniters can be installed in accordance with customers’ requirements with optional alumina, cordierite, copper or other metallic materials. |
| ›› |
Wire |
Standard wires of 200 ℃, 250 ℃, 450 ℃, 550 ℃ can be selected. Specification of wire is 20 AWG. If metallic holder is used, Igniter needs only single wire. |
| ›› |
Terminal |
Terminals can be installed in various according to customers’ requirements. |
| ›› |
Control Mode |
The Igniters are compatible with various control modes of many manufacturers’ products. Do not need the specialized controller. |
| ›› |
Quality Certificate |
Quality Certificate of CSA for gas hot surface Igniter |
| |
|
|
|
| |
Normal Assembly Mode
Here below is the normal assembly mode:
The protrude length of heater:L0 |
Current dimensions of ceramic holder: ΦD×L |
13 |
Φ6.3×44
Φ6.3×50
Φ9.5×25
Φ10×30
Φ10×45
Φ10×158 |
Regarding the mounting brackets, please refer to the following dimensions. You can choose the corresponding mounting bracket based on the assembly dimensions of your equipment.
The Igniter with metallic holder and single-wire
Accessory
 |
In order to replace the hot surface Igniters of other companies in the market conveniently, Le-mark can provide you with the shown accessories to assemble the Igniters.
For more details, please refer to the Instruction Manuals of specific products correspondingly. |
|
