| |
|
| |
|
| ›› |
Voltage scope: |
12V, 21V, 24V |
 |
| ›› |
Range of operation voltage: |
+10% -15% |
| ›› |
Cold Resistance: |
0.30-4.5 Ohms |
| ›› |
Time for reaching to 980°C: |
5Sec |
| ›› |
Rated Temperature: |
>1080°C |
| ›› |
Power: |
45W |
| |
Note: The data in table are for reference only. The actual value will be adjusted according to the customers’ specific applications. |
| |
|
| |
|
|
|
| ›› |
Materials of heater |
Si3N4 & MoSi2 |
|
| ›› |
Materials of holder |
Holder The Igniters can be installed in accordance with customers’ requirements with optional alumina, cordierite, copper or other metallic materials. |
| ›› |
Wire |
Standard wires of 200 ℃, 250 ℃, 450 ℃, 550 ℃ can be selected. Specification of wire is 20 AWG. If metallic holder is used, Igniter needs only single wire. |
| ›› |
Terminal |
Terminals can be installed in various according to customers’ requirements. |
| ›› |
Control Mode |
The Igniters are compatible with various control modes of many manufacturers’ products. Do not need the specialized controller. |
| ›› |
Quality Certificate |
Quality Certificate of CSA for gas hot surface Igniter |
| |
|
|
|
| |
Normal Assembly Mode
Here below is the normal assembly mode:
The protrude length of heater:L0 |
Current dimensions of ceramic holder: ΦD×L |
34 |
Φ9.5×25
Φ10×30
Φ10×45
Φ10×158 |
Regarding the mounting brackets, please refer to the following dimensions. You can choose the corresponding mounting bracket based on the assembly dimensions of your equipment.
Accessory
 |
In order to replace the hot surface Igniters of other companies in the market conveniently, Le-mark can provide you with the shown accessories to assemble the Igniters.
For more details, please refer to the Instruction Manuals of specific products correspondingly. |
|
